FLAPS AND SPEEDBRAKES: CHECK THE COMMAND AND THE RESULT
1. Assign the flap lever to Flaps Axis. 2. Open Fenix CONTROLS CONFIG and change pages to FLAPS. Start calibration at UP and capture positions in order. The official article notes that a reversed axis may need a small movement before capturing UP. 3. Store and check UP, 1, 2, 3 and FULL separately. [75, Flap-axis assignment; calibration; reversed-axis UP caveat]
Compare lever selection with the actual aircraft indication; selecting a position does not prove that surfaces have finished travelling. For spoilers, test proportional lever movement and the separate arming command. The URSA example distinguishes its spoiler axis from arm/disarm button edges. Reaching an axis endpoint alone does not demonstrate an armed ground-spoiler state. [75] [74, Assignment table: separate spoiler axis and arm/disarm button39]